← Back to Browse Parts
Files (2)
Q2_Oben.stl
STL
65.0 KBQ2_Unten.stl
STL
70.4 KBPrint guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
2 model files
Typical selected file
12g
Based on 25% main infill for the largest likely-needed model file
Material cost
$0.29
Filament only at roughly $24/kg PETG / ASA
Print time
21m–34m
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Q2_Oben.stl | Printable file | 65.0 KB STL | 11g $0.26 | 12g $0.28 | 26g $0.62 | Ensure the screws are accessible for easy assembly and adjustment. |
| Q2_Unten.stl | Printable file | 70.4 KB STL | 11g $0.27 | 12g $0.29 | 26g $0.63 | Ensure the screws are accessible for easy assembly and adjustment. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Phone Mounts
Audi Q2 smartphone holder V2
0 downloads38 views0 likes
Shared by
3DPrintedCarPartVerified
Description
Printed for an iPhone holder that is held by 2 screws (7mm distance) Holder can be expand until its tight and then be screwd.
Compatible Cars
Published Jun 28, 2026Updated Jul 15, 2026
Originally published on thingiverse.com by Benjamin KSZ (scars85) · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
