Audi R8 / Lamborghini Gallardo Fog Light Bulb Seal 420945703 - image

Files (2)

R8_FOG_BULB_SEAL_FLAT_V0.1.stl

STL

704.7 KB

R8_FOG_BULB_SEAL_V0.1.stl

STL

883.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
R8_FOG_BULB_SEAL_FLAT_V0.1.stl	Printable file	704.7 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping.
R8_FOG_BULB_SEAL_V0.1.stl	Printable file	883.4 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Audi R8 / Lamborghini Gallardo Fog Light Bulb Seal 420945703

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Audi foglight 420945703 is used in the Mk1 R8 and the Lamborghini Gallardo. This unit is prone to failure due to corrosion on the contacts, rather than the bulb blowing. The bulb holder is usually glued in which makes replacement difficult with access having to be gained by removal of the bumper (R8). This seal is fitted between the bulb holder and the fog light unit (420945703). Quick model whilst the unit was disassembled. Two designs included, a model as-is which may be difficult to print with or without supports. Second model is flatter on one side so its easier to print and should still fit.