Audi RS3 Paddle shifter extensions - image

Files (2)

left.stl

STL

1019.7 KB

Right.stl

STL

875.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
left.stl	Choose left variant	1019.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Right.stl	Choose right variant	875.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Audi RS3 Paddle shifter extensions

0 downloads55 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

You will need: 2x20mm M3 screws 2xM3 nuts. Catalog note: Audi RS3 Paddle shifter extensions is a 3D-printable car-part listing indexed for classified fitment Audi RS3. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.