Audi TT (MK1) center vent phone mount with 13mm ball - image

Files (1)

vent_mount_13mm_ball_remix.stl

STL

395.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
vent_mount_13mm_ball_remix.stl	Mount / bracket	395.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Audi TT (MK1) center vent phone mount with 13mm ball

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Could have been 2mm+ closer to the vent. First try and it feels great on the car;-) Also, 0.5mm thicker around the vent and 3mm total on the base. I thought of making a mount for the ball so you could swap any size you want, but honestly i got lazy and just want to finish because it's midnight.