Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi Universal magnetic Phone Holder - fits between round ventilation i.e.A3 P8
Shared by
3DPrintedCarPartDescription
magnetic phone holder inspired by the great mounting constructed by undergroundsurf I already had a magnetic phone holder (google/amazon: Automobio) in the A3 P8, but soon the ventilation mounting ripped out the plastic air guide. This is an as much simplified construction as possible. If you slide out the mobile, just push it down. The back of the mobile needs of course a small steel plate too. The easiest way it to put a thin steel plate between you may used mobile cover and the phone itself. I mounted the Automobio magnet holder with a M3x6mm Allen key screw. You can build the magnet holder yourself by remixing the construction (STEP file also att.) and integrate 3-4 Neodym magnets you can find on eBay. Use a steel plate behind the magnets to increase the holding force. Then put on some sticky silicon sheet/tape (i.e. rescue tape) to avoid having the mobile slip down from the magnets.
Compatible Cars
Originally published on thingiverse.com by solarthermienator (solarthermienator) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
