Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Intercooler_emblem.stl | Primary model | 169.8 KB STL | Slice file | Slice file | Slice file | Ensure the emblem is oriented for minimal supports in the slicer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
AW11 Toyota MR2 Intercooler Emblem
Shared by
3DPrintedCarPartDescription
This is an emblem I made for the intercooler cover on my AW11 Toyota MR2. Heat from the engine has not been an issue because this part of the intercooler cover is sealed from the engine bay and, through the grille, is exposed to outside air.
Compatible Cars
Originally published on thingiverse.com by jesse ahlan (jesseahl) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Toyota Mr2 Aw11 Badge
License: CC BY-NC
View STL source
Toyota Yaris Cap
License: CC BY-SA
View & download STL files
Toyota Land Cruiser BJ70 Grille Emblem
License: CC BY-NC-SA
View STL source
Classic Parts Contest: Toyota Logo Badge
Toyota
License: CC BY
View & download STL files
Frontal Toyota Yaris emblem 2008
License: CC BY-NC
View STL source
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
