backlight numbers Ford Focus 1 wagon - image

Files (4)

_╨┐╨╛╨┤╤ü╨▓╨╡╤é╨║╨╕_╨╜╨╛╨╝╨╡╤Ç╨░1.stl

STL

348.9 KB

_╨┐╨╛╨┤╤ü╨▓╨╡╤é╨║╨╕_╨╜╨╛╨╝╨╡╤Ç╨░2.stl

STL

3.7 MB

_╨┐╨╛╨┤╤ü╨▓╨╡╤é╨║╨╕_╨╜╨╛╨╝╨╡╤Ç╨░3.stl

STL

3.7 MB

_╨┐╨╛╨┤╤ü╨▓╨╡╤é╨║╨╕_╨╜╨╛╨╝╨╡╤Ç╨░4.stl

STL

344.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
_╨┐╨╛╨┤╤ü╨▓╨╡╤é╨║╨╕_╨╜╨╛╨╝╨╡╤Ç╨░1.stl	Printable file	348.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
_╨┐╨╛╨┤╤ü╨▓╨╡╤é╨║╨╕_╨╜╨╛╨╝╨╡╤Ç╨░2.stl	Printable file	3.7 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
_╨┐╨╛╨┤╤ü╨▓╨╡╤é╨║╨╕_╨╜╨╛╨╝╨╡╤Ç╨░3.stl	Printable file	3.7 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
_╨┐╨╛╨┤╤ü╨▓╨╡╤é╨║╨╕_╨╜╨╛╨╝╨╡╤Ç╨░4.stl	Printable file	344.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

backlight numbers Ford Focus 1 wagon

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The first version of the license plate frame. I soldered together with a gas soldering iron Dremel 2000. In the future, you will need to opt it with a film. Thank you all for your attention.