Files (1)

baofeng_to_iphone_holder.stl

STL

29.7 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
baofeng_to_iphone_holder.stl	Mount / bracket	29.7 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Baofeng UV-5R mount for Jeep YJ

0 downloads157 views0 likes

Shared by

Michael Chen

Verified

Description

I wanted a holder for my Baofeng UV-5R two-way radio in my 1995 Jeep YJ. Since I already made an iPhone 6 holder (see http://www.thingiverse.com/thing:1148280), I figured why not just make an insert for that (assuming I don't need to hold both at once). So here it is -- it slides in to the iPhone holder and the radio belt clip goes through the hole. Assuming you have a Jeep YJ and an iPhone 6 and a Baofeng UV-5R then this is just the thing for you! Or, if you just want to hold your radio and you don't want the iPhone holder, I don't see any reason why you couldn't just print this part and the dashboard grabber part from the iPhone holder and glue them together without the phone holder part.