Battery hold-down for Mk3 Toyota MR2 Spyder - image

Files (3)

battery_holddown_backend.stl

STL

13.8 KB

battery_holddown_frontend.stl

STL

13.9 KB

battery_holddown_middle50mm.stl

STL

17.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
battery_holddown_backend.stl	Accessory piece	13.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
battery_holddown_frontend.stl	Accessory piece	13.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
battery_holddown_middle50mm.stl	Accessory piece	17.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Battery hold-down for Mk3 Toyota MR2 Spyder

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a three-part battery hold-down. When I bought my used Spyder, the battery was missing the hold-down bracket, so I designed this strong bracket with a customizable emblem socket. The three printed pieces slide together without fasteners to make a complete upper hold-down bracket. It attaches to the existing battery support post in the back and uses a regular battery hold-down long-threaded j-hook on the front. Print your own customized 50mm diameter decoration "chip" to complete the look.