Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 90% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| citroen_berlingo_window_system_cable_plug_v01.stl | Primary model | 104.4 KB STL | Slice file | Slice file | Slice file | Ensure strong adhesion to the print bed to prevent warping. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Berlingo / Partner window system cable plug
Shared by
3DPrintedCarPartDescription
My good old Citroen Berlingo electric window regulator stopped working. I took it apart and found that some plastic parts are broken. So I printed this little piece that holds the cable in place. Took me a while to put it all back together, but it works now! Since it's so tiny and supposed to be very strong, I printed it with 100% fill, with supports and with adhesion. Feel free to experiment other settings.
Compatible Cars
Originally published on thingiverse.com by Danas Berznitsky (sesamme) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
