BMW E39 5 Series TEC Cup Holder Pad - image

Files (2)

TEC_Cup_Holder_Pad_-_Pad_Beveled.stl

STL

138.4 KB

TEC_Cup_Holder_Pad_-_Pad_Beveled2.stl

STL

138.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU 20%	TPU 40%	100% solid	Recommendation
TEC_Cup_Holder_Pad_-_Pad_Beveled.stl	Mount / bracket	138.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation
TEC_Cup_Holder_Pad_-_Pad_Beveled2.stl	Mount / bracket	138.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

BMW E39 5 Series TEC Cup Holder Pad

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a pad that sits on the TEC folding cup holder for the BMW E39 5 series. I found that my preferred travel mug was slightly too large of a diameter to sit completely down in the cup holder. Print this in TPU and it will create a nice, non-vibration surface. You can also print with zero bottom layers to expose the infill, which could also create a nice "catch" for any errant drips.