Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| bmwE461Dinfascio_50x180.stl | Printable file | 476.7 KB STL | Slice file | Slice file | Slice file | Ensure a stable printing surface to prevent warping |
| bmwE461Dinfascio_55x180.stl | Printable file | 204.8 KB STL | Slice file | Slice file | Slice file | Ensure a stable printing surface to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
BMW e46 1DIN fascio plate for aftermarket stereo
Shared by
3DPrintedCarPartDescription
E46 fascio for aftermartket stereos. I don't know about other stereo systems but mine was a bit taller so with attached 55x180 model (the one without top) it fit fine. I also added a file with a notch and full editable project to customize for your needs. Hopefully it will be helpful as I couldn't find any designs of this. Enjoy!
Compatible Cars
Originally published on thingiverse.com by Aesroter aasteros (Aesroterasteros1) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
