Files (3)

BMW_E46_Rear_Cup_Holder.stl

STL

253.8 KB

BMW_E46_Rear_Cup_Holder_Backing.stl

STL

70.2 KB

BMW_E46_Rear_Cup_Holder_v1.step

STEP

69.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_E46_Rear_Cup_Holder.stl	Mount / bracket	253.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
BMW_E46_Rear_Cup_Holder_Backing.stl	Mount / bracket	70.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
BMW_E46_Rear_Cup_Holder_v1.step	Mount / bracket	69.2 KB STEP	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

BMW E46 Rear Armrest Cupholder

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Cupholder insert for the rear armrest of BMW E46. The backing is inserted under the leather. Use the backing to mark the location for your cuts. A single slit in the center "web" is also needed to get the backing into the armrest. Carve out the foam as needed to clear the cupholder. Insert the backing, insert the cupholder and use 6 wood screws to hold them together. The screws I used have 4mm outer thread.