Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
BMW E90 Cup Holder Bottom
Shared by
3DPrintedCarPartDescription
Right here is the bottom of the cup holder found within the BMW E90 (E9X). I spent well over 8 hours working on this so I would appreciate if you don't use my work for commercial uses. I made about 12 copies of this part before I was happy with it. This is also my second part in Fusion360 but really my first part that I spent a lot of time and effort into. But feel free to use this in your car, I hope you can enjoy the amount of work I have put into this. I have some print settings down below for PETG if you're interested.
Compatible Cars
Originally published on thingiverse.com by Joseph Chilcoat (cjoseph212) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
