Files (2)

BMW_M3_E30_Wheel.stl

STL

374.2 KB

BMW_M3_E30.stl

STL

510.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_M3_E30_Wheel.stl	Printable file	374.2 KB STL	Slice file	Slice file	Slice file	Print the body and wheels separately to allow for different colors.
BMW_M3_E30.stl	Printable file	510.0 KB STL	Slice file	Slice file	Slice file	Print the body and wheels separately to allow for different colors.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

BMW M3 E30

0 downloads159 views0 likes

Shared by

Michael Chen

Verified

Description

This model is inspired by the BMW M3 E30. Its printed in two halfs, which you can connect with pins that are also printed. Its very easy. If you want you can use some glue. The Body and the wheels are on two separate files, so you can print your wheels in a diffrent color then the body. The pictures are just renderings if you want to support me you can donate something here:) https://www.buymeacoffee.com/trikeo