Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Bottle holder for Dacia Dokker (Renault Dokker)
Shared by
3DPrintedCarPartDescription
Clear width is 78 mm at the bottom. Inner height is 86 mm. Wall thickness is 2 mm. Suitable for the german "Normbrunnenflasche". Print with ASA or PET or nGen. The round recess in the bottom of the printed bottle holder must point to the front of the car.
Compatible Cars
Originally published on thingiverse.com by Hans W. (Hans_W) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
