E30_Brake_Intake_to_3in_hose_adapter.stl

STL

1.4 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
E30_Brake_Intake_to_3in_hose_adapter.stl	Primary model	1.4 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Brake Duct to 3"in Hose Adapter for BMW vehicles

0 downloads193 views0 likes

Shared by

Verified

Description

Adapter to go from stock BMW E30 brake cooler intakes to 3" hose for aftermarket brake cooler plates.

Time: 2h

Filament: 50g

Supports: Not needed

Published Feb 14, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.