Files (1)

buttons_on_citroen_c5_dashboard.stl

STL

553.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
buttons_on_citroen_c5_dashboard.stl	Primary model	553.6 KB STL	Slice file	Slice file	Slice file	Ensure the press button is securely attached to the printed board

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Buttons on citroen c5 dashboard

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I am challenged to open the garage door with an integrated button on the dashboard of my car (citroen c5) So I removed the three fake buttons on the board and designed a slim board with a press button in the center (the press button was found in a raspberry pi starter kit). I added a hook to be sure to not drop the remote inside the dashboard.