BYD Atto 3 front bumper filler plug - image

Files (1)

Atto3_FrontBumperPlug_20230222.stl

STL

30.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 100%	100% solid	Recommendation
Atto3_FrontBumperPlug_20230222.stl	Primary model	30.0 KB STL	Slice file	Slice file	Slice file	Use adhesive like silicone for rear attachment

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

BYD Atto 3 front bumper filler plug

0 downloads58 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

In many parts of the world, the BYD Atto 3 EV comes shipped with an unsightly black numberplate frame fixed to the front bumper. The frame can be removed, but it leaves two rectangular holes. This item is intended to be a blanking plug for these holes, and can be affixed from the rear, with some adhesive such as silicone. Tests with 80%% infill PLA showed signs of shrinking in hot weather, but later tests using 100% infill and PETG have held up well in the Australian sun. The plug can be prepped and painted with the desired automotive paint. Enjoy.