C4 Corvette Headlight Knob remix - image

Files (1)

C4_Corvette_headlight_knob.stl

STL

159.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
C4_Corvette_headlight_knob.stl	Primary model	159.0 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid part warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

C4 Corvette Headlight Knob remix

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.