C5 Chevy Corvette outer front spoiler bracket - image

Files (3)

reinforcement-bottom-inner.stl

STL

829.1 KB

reinforcement-top-inner-2.stl

STL

529.3 KB

reinforcement3.stl

STL

1.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
reinforcement-bottom-inner.stl	Printable file	829.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
reinforcement-top-inner-2.stl	Printable file	529.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
reinforcement3.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Spoilers

C5 Chevy Corvette outer front spoiler bracket

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The front outer spoiler pieces on the C5 Corvette are notoriously flimsy. These might be used to strengthen them. Off-road use only. Use at your own risk. Your mileage may vary. The bottom (boomerang-shaped) piece was designed to slot into each other. My printer doesn't have enough area to print at full size. The other two pieces might be optional. They could be used to sandwich the bumpercover to the outer spoiler.