C5W Bulb Holder (Position Lights) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

C5W Bulb Holder (Position Lights)

0 downloads56 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

C5W Bulb Holder (Position Lights) This model was made with TinkerCAD, to replace the original bulb holders of a Land Rover Serie 1 (1952) that had completely rusted and was no longer stable. Can be adapted for any headlight that is at least 42mm in diameter. The bulb is held by pressure / tension of the support (no possible movement, perfect fit). It will be necessary to add 2 contactor males of 0,8 - 1mm. It is possible to add an aluminum baffle to increase the refraction of the filament (under the bulb: 0.5 - 1mm of space). _____________ Support pour ampoule C5W ( Feux de position ) Ce modèle a été réalisé avec TinkerCAD, afin de remplacer les support d'ampoules d'origines d'une Land Rover Serie 1 (1952) qui avaient complètement rouillé et n'était plus stable. Peu ètre adapté pour tout phares qui on au moins 42mm de diamètre. L'ampoule est maintenue par pression/tension du support (aucun mouvement possible, perfect fit). Il faudra rajouter 2 contacteur males de 0,8 - 1mm. Il est possible de rajouter un déflecteur en aluminium pour augmenter la refraction du filament (sous l'ampoule: 0,5 - 1mm d'espace).