C7 Corvette iPhone (13 pro) Holder - image

Files (1)

C7_iPhonesingle.stl

STL

179.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
C7_iPhonesingle.stl	Primary model	179.9 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit on the Corvette's interior to prevent the holder from coming loose while driving

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

C7 Corvette iPhone (13 pro) Holder

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Wanted a simple drop in Phone holder for my C7 Corvette. I did not want anything to mess up the factory interior, or be permanent. Found the Clip on here, and a old phone holder, changes the sizing of the phone holder, attached to clip and played with the angles. I have both a work phone (Iphone 12), and a personal (Iphone 13 Pro) Both fit the holder, I later made a dual holder, but this is the single for anyone who needs it.