
Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Cadillac_Switch_Housing.stl | Printable file | 192.1 KB STL | Slice file | Slice file | Slice file | Ensure a clean and dry print environment to prevent warping or layer separation. |
| Cadillac_Switch_Lever.stl | Printable file | 62.4 KB STL | Slice file | Slice file | Slice file | Ensure a clean and dry print environment to prevent warping or layer separation. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Cadillac Cruise Control Switch Repair
Shared by
3DPrintedCarPartDescription
Cruise control switch repair for 1974-1979 Cadillac. May fit other switches in 1970s Cadillacs. Maybe even up into the 80s. If your cruise control switch feels all soft and mushy, and doesn't work, it's probably the chrome plated plastic lever that is broken. I also have the switch housing, in case yours is broken. You will need to reuse all the other internal components of the switch. Be careful not to lose the tiny spring in the lever. The bores in the lever for the spring-loaded detent thingy may need to be cleaned up, for the thingy to move up and down freely. I made this for a friend, I do most of the repairs to his 1976 Cadillac Eldorado.
Compatible Cars
Originally published on thingiverse.com by Benjamin Sangtash (MadMan604) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.

