Cap trunk for Nissan X-Trail T-31 - image

Files (2)

Cap_trunk_07_1x.stl

STL

327.4 KB

Cap_trunk_07_1x_2.stl

STL

61.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cap_trunk_07_1x.stl	Cover / cap	327.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Cap_trunk_07_1x_2.stl	Cover / cap	61.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Cap trunk for Nissan X-Trail T-31

0 downloads82 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Cap trunk for Nissan X-Trail T-31. Catalog note: Cap trunk for Nissan X-Trail T-31 is a 3D-printable car-part listing indexed for classified fitment Nissan X-Trail. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.