Files (5)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| cupholder_v3_thick_voronoi.stl | Mount / bracket | 26.5 MB STL | Slice file | Slice file | Slice file | Print with the skinny side down to avoid supports |
| cupholder_v2_solid.stl | Mount / bracket | 160.4 KB STL | Slice file | Slice file | Slice file | Print with the skinny side down to avoid supports |
| cupholder_v2_thin_voronoi.stl | Mount / bracket | 14.6 MB STL | Slice file | Slice file | Slice file | Print with the skinny side down to avoid supports |
| cupholder_v4_solid_4point5OD.stl | Mount / bracket | 161.3 KB STL | Slice file | Slice file | Slice file | Print with the skinny side down to avoid supports |
| cupholder_v5_solid_4point5OD.stl | Mount / bracket | 185.3 KB STL | Slice file | Slice file | Slice file | Print with the skinny side down to avoid supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
car cupholder adapter
Shared by
Michael ChenDescription
This will fit a Nalgene, most coffee cups, pint-size mason jars and also most phones and tablets. I've tried it in a few vehicles and it fits most of the car cupholders but is too fat for in-door cupholders. My favorite so far is the solid one. It is a little pointy though, so a little edge sanding is a good idea. The solid one uses the most material but prints the fastest. The thin voronoi uses the least material but takes ~12 hours on my prusa. No supports needed for any of these if you print with the skinny side down (as oriented in the stl). update 4/22/22: V4 is a little larger to so it can hold even bigger Takeya and maybe Hydro Flask thermos. V4 internal diameter is ~102 mm.
Print Settings
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
