Files (1)

Snake-Headrest-Hanger.stl

STL

582.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Snake-Headrest-Hanger.stl	Primary model	582.6 KB STL	Slice file	Slice file	Slice file	Ensure the 'bumpy' side is facing down during installation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Car Headrest Hanger

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A simple snake-shaped headrest hanger to hang bags and such in my VW T6 The cool thing is that you can hang things from both sides and you don't have ugly and dangerous hooks. No hooks means it can be slim and is super easy to print. I designed it for my Transporter T6 but I guess it would fit a lot of other models. Please update me if you tried it successfully! - Space between the 2 bars of the headrest is 150mm (5.9'') - Diameter of the holes is 15mm (0.59'') The "bumpy" side should be installed facing down.