Car iPhone holder (iPhone 6 and 7 for Mini Cooper vehicles) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Car iPhone holder (iPhone 6 and 7 for Mini Cooper vehicles)

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Hi all! Do you have a Mini Cooper? I make for my Mini R59 (Roadster) - it will fit in all mini 2. generation R56-R59 iPhone holder. I'm using it with BT audio and it is greate - but you need to use USB charger over 12V socket - you can't use MINI USB - it is not possible to use BT audio. This is designed for iPhone 6 / 7 but it is possible use with all smaller iPhones 6/7 Plus you can't use (now). It can fit with iphone case. I make it bigger 1mm on each site - you need to use soft tape. For USB cable I used hot glue Enjoy it I'm still working on it.