Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CD_Phone_Holder.stl | Mount / bracket | 23.8 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
CD Slot iPhone 6 6s Holder for mini cooper vehicles
Shared by
3DPrintedCarPartDescription
Phone holder for the iPhone 6 and 6s that slides into the cd slot on a car stereo (Mini in my case). It holds the phone with no case very securely, could be scaled up to fit a case. I've include the stl and sketchup files. Total width is 100mm to print on an M3D or similar printer. I used Black PLA. I did have an issue with the wedge curling at the ends, but this turned out to be a neutral to positive thing as it ensures a solid hold in the CD slot. There is a notch on the bottom to fit the big lightning adapter. In black it is barely noticeable in the car, of course it does block the knobs and buttons somewhat in a 2011 mini.
Compatible Cars
Originally published on thingiverse.com by Dale Brannigan (dbrannigan) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
