Center Console Latch - 2004/2005 Honda Civic/Accord preview

Files (1)

v4_CivicConsoleLatch.stl

STL

706.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / another high-temp filament 20%	ABS / another high-temp filament 25%	100% solid	Recommendation
v4_CivicConsoleLatch.stl	Primary model	706.0 KB STL	Slice file	Slice file	Slice file	Print part sideways (L shape against the bed) for maximum structural integrity

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Center Console Latch - 2004/2005 Honda Civic/Accord

0 downloads20 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

ABS or another high-temp filament

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

Higher infill for added strength, possibly 20-30% or more

Difficulty

Not rated — inspect geometry

Vehicle heat

Higher-heat material; verify location and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement center/armrest console latch lock for a 2004 Honda Civic Replaces official part Honda 83408-S5A-010ZA Armrest Lock Hand-measured dimensions with calipers, may not be perfectly to spec. Added more material at joint (where OEM part broke) in order to avoid future breakage. This makes the latch a bit stiffer, however. Likely works on other year Civics and Accords up to 2005 with similar interior Printing Notes: Print in ABS (or other high-temp filament) ONLY. This will need to withstand the high temperatures of the car. If you only have PLA I'd recommend just purchasing the official part from Amazon for $10 Print part sideways (L shape against the bed) to maximize structural integrity in direction of required flex. Print Settings Filament: Generic ABS.