Chevrolet Sonic/Aveo instrument Gauges Holder/Case - image

Files (1)

Chevy_Instrument_Case.stl

STL

469.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

22g

Based on 25% main infill across listed model files

Material cost

$0.54

Filament only at roughly $24/kg PETG / ASA

Print time

38m–1.1h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Chevy_Instrument_Case.stl	Primary model	469.7 KB STL	21g $0.50	22g $0.54	49g $1.18	Ensure proper ventilation when printing with PETG or ASA

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Chevrolet Sonic/Aveo instrument Gauges Holder/Case

1 downloads118 views0 likes

Shared by

Alfred

Verified

Description

Don't print car parts with PLA!! Print and use this Design at your own risk!! Not for commercial use!! Only for private use!! This Design works for Chevy Sonic/Aveo from 2011 to 2016. For Gauges with 52mm in diameter. I printed this with ABS/PC. You have to do your own research for materials, which you can use for car parts.