Files (6)

Chevy.obj

OBJ

20.3 KB

Chevy.stl

STL

6.9 KB

Chevy_insert.obj

OBJ

6.6 KB

Chevy_insert.stl

STL

2.2 KB

Chevy_outline.obj

OBJ

13.5 KB

Chevy_outline.stl

STL

4.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Chevy.obj	Accessory piece	20.3 KB OBJ	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Chevy.stl	Accessory piece	6.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Chevy_insert.obj	Accessory piece	6.6 KB OBJ	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Chevy_insert.stl	Accessory piece	2.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Chevy_outline.obj	Accessory piece	13.5 KB OBJ	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Chevy_outline.stl	Accessory piece	4.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Chevy Emblem - 2 Piece - Click

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a Chevrolet emblem with outline and insert. Outline: *6.5" width, 2.68" height, and 3mm thick.* Try glow in the dark for this piece. Insert: *5.47" width, 1.75" height, and 3mm thick.* Try your favorite color for this piece. 3 hour print for both pieces on Anycubic Mega Zero. 1mm spacing between outline and insert. Great for mix & match filament colors and dual extruders! Tips buy us coffee! Comments, Likes, and Remixes keep us inspired. Feel free to ask questions. Follow Bits4Bots for more designs.