Chevy Square Body Ash Tray USB and Aux Cord Adaptor K5 Blazer - image

Files (1)

Chevy_Ashtray2STL.stl

STL

621.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Chevy_Ashtray2STL.stl	Primary model	621.0 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Chevy Square Body Ash Tray USB and Aux Cord Adaptor K5 Blazer

0 downloads160 views0 likes

Shared by

Michael Chen

Verified

Description

I made this adapter to replace the unused ash tray with a USB/AUX cable so I could connect and charge my phone. I used it for a 1990 Chevy Blazer, but I believe it should fit Chevrolet and GMC trucks from 1973-1987 as well as Blazers and Suburbans through 1991. See complete instructions, parts used as well as the Fusion 360 files here: https://azjake.com/ash-tray