Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| mi5.stl | Primary model | 2.8 MB STL | Slice file | Slice file | Slice file | Ensure proper fit around the driver side accessories bay column, as the design is roughly hand-drawn |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Chevy Volt (2017) Phone Mount Xiaomi Mi5
Shared by
3DPrintedCarPartDescription
**Work in progress, will upload pictures later. This is a phone mount for the 2017 Chevrolet volt plug in EV. It's printed in two parts and can be glued with any suitable phone holder; I've included one for my phone, the Xiaomi Mi5. It's mounted on the driver side accessories bay column. It's roughly hand drawn, so the fit is not perfect around the column. The fit for the phone, and USB-C cable, is perfect (use the included Xiaomi USB-C cable. A great accessory for using android auto, phone slides right in. M3 hardware may need to be pressed in, depending on printer tolerances. Highly recommend printing in ABS or PETG, something with a little flex and won't warp too easily on a hot summer day. Required: - 2x M3 hex nut - 2x M3x12 screw - Xiaomi USB-C cable - Xiaomi Mi5 - screwdriver Assembly is self explanatory, see pictures. Tighten down the screws to your liking. Slide USB-C cable in. Enjoy Android auto.
Compatible Cars
Originally published on thingiverse.com by Anson Li (SanguineDrone) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
