chip for the hood holder for renault laguna 2 - image

Files (1)

chip_for_the_hood_holder_v0.stl

STL

225.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

17g

Based on 25% main infill across listed model files

Material cost

$0.41

Filament only at roughly $24/kg PETG / ASA

Print time

29m–49m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
chip_for_the_hood_holder_v0.stl	Mount / bracket	225.3 KB STL	16g $0.38	17g $0.41	38g $0.91	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

chip for the hood holder for renault laguna 2

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

the model works for me. after printing only bad support tear off. Catalog note: chip for the hood holder for renault laguna 2 is a 3D-printable car-part listing indexed for classified fitment Renault Laguna 2. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.

Compatible Cars

Renault Laguna

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Miron Mikron (MrAir23) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.