Chrysler Crossfire Phone Dock iPhone X or Modify - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Chrysler Crossfire Phone Dock iPhone X or Modify

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I designed this holder for my iPhone X to sit on the gear shifter boot and be secured by a radar power plug that goes through the hole on the holder. My iPhone measures 5.770” x 2.930” x.475”, approximately. This keeps my windshield and dash free of clutter. For your use, verify that your power plug will fit the.825” hole and will fully plug in with the.200” thickness of the flange. Also, I don’t know if this will work for the automatic transmission version, you may need to modify it for that. If you need this for a phone other than the iPhone I mentioned, you will need to modify it for that use. The license allows for non-commercial personal use and modifications. Use this holder at your own risk. The printer I used is the Ender 3 V2 Neo. I set the head temp at 203 and the platen at 64. I also enabled support, zig zag for all overhangs. I printed it with the backside on the platen. Takes about 4 hours.