Files (1)

Gommino_Blocchetto.stl

STL

67.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU 20%	TPU 25%	100% solid	Recommendation
Gommino_Blocchetto.stl	Primary model	67.6 KB STL	Slice file	Slice file	Slice file	Print with a hotend temperature of 240°C and a heatbed temperature of 40°C.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Citroen AMI Ignition Lock

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A cover for the ignition keylock for the Citroen AMI to cover the metal with black TPU Printing: Print in TPU with 20-30% infil, 240°C hotend and 40°C heatbed. After print apply small piece of two-side tape and glue in the car (pay attention to apply correctly in the ignition lock).