Citroen Berlingo Cup Holder for central storage box preview

Files (1)

Citroen Berlingo Multispace Cupholder.stl

STL

2.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Citroen Berlingo Multispace Cupholder.stl	Mount / bracket	2.3 MB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed for a stable print

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Citroen Berlingo Cup Holder for central storage box

1 downloads45 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

A cup holder for the central storage box on the Citroen Berlingo Multispace Specifically designed to hold a protien shaker bottle, something the current cup holder struggled to do. It has holes on the underside so that something else could be made to perhaps hold a more slender can in place without it falling straight through. The diameter of the hole is 80mm and at the moment anything with a diameter smaller than that will fall straight through. However the front cup holder on the storage box works reasonably well for a regular 330ml can or larger red bull/monster can. There are also a number of holes for pens or sharpies. They work if the lids are on, if there are no lids or clips on the pens they will fall through.