Files (1)

BXClip_v3.stl

STL

64.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BXClip_v3.stl	Clip	64.1 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Citroen BX - Trunk cover clip

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

An aftermarket accessory was available for the Citroen BX, which consists of a door for the rear boot trim panels to make a little storage area. While the doors are relatively robust, the clips fail quite quickly. A fellow BX owner asked if I could make up some replacements, so he posted an original, and with Fusion360 and a couple of trial and error prints, we got to a reliable replacement. I've now knocked up 15 of these things, and they seem to be reliable enough to share. Enjoy. There is a lot more detail about the clip here; https://bxproject.co.uk/blog/citroen-bx-3d-printed-trim-clip/