Citroen C4 2022 Poco F3 Phone Holder with Usb C - image

Files (1)

DOCK2.stl

STL

582.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

24g

Based on 25% main infill across listed model files

Material cost

$0.59

Filament only at roughly $24/kg PETG / ASA

Print time

42m–1.2h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
DOCK2.stl	Primary model	582.7 KB STL	22g $0.54	24g $0.59	53g $1.28	Ensure the USB connector is securely attached with a small amount of adhesive, avoiding contact with the phone.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Citroen C4 2022 Poco F3 Phone Holder with Usb C

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Soporte para Poco F3 y Citroen C4 2022 La parte de abajo tiene la forma de la bandeja del C4. Al conector usb, hay que ponerle con cuidado, una gota de loctite antes de meterlo en su sitio y meter el teléfono antes de que seque (y por supuesto con cuidado de que el adhesivo no toque el telefono) para que se quede en el ángulo y posición correctos. El Cable: https://amzn.eu/d/3cYotvb

Compatible Cars

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Javi Ceb (JaviCeb) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.