Citroen C6 Rear Numberplate Panel Repair - image

Files (2)

inner_clips_2_ab.stl

STL

47.5 KB

outer_clips_2_ab.stl

STL

48.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
inner_clips_2_ab.stl	Clip	47.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports
outer_clips_2_ab.stl	Clip	48.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Citroen C6 Rear Numberplate Panel Repair

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The rear numberplate panel on the Citroen C6 is held to the boot lid by four screws along the lower edge. The bolts screw into threaded clips, but the plastic supports for these clips often break. These parts hold captive nuts to replace the threaded clips and their plastic supports. 12 May 2020. Revision 2. STL files re-oriented so that Z axis is up. Slightly tighter nut pockets and minor changes for printability.