Citroen DS - Voltage Regulator Base Plate + Mount - image

Files (3)

06-BasePlate-Fusebox-NewRegulator-Ampere-Hole.stl

STL

464.8 KB

06-BasePlate-Fusebox-NewRegulator-Ampere-Hole.stp

STP

70.3 KB

PlasticWasher16-6mm.stp

STP

6.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
06-BasePlate-Fusebox-NewRegulator-Ampere-Hole.stl	Printable file	464.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports
06-BasePlate-Fusebox-NewRegulator-Ampere-Hole.stp	Printable file	70.3 KB STP	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports
PlasticWasher16-6mm.stp	Accessory piece	6.0 KB STP	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Citroen DS - Voltage Regulator Base Plate + Mount

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a base plate to mount a modern voltage regulator in the space available next to the left-hand mounted battery. I also mounted a Citroen AX fusebox to add some fuses for the different live lines running through the car. And an hole for a 28x48mm ampere meter. The 3 holes for mounting onto the battery frame are 7 mm diameter. 91.0 mm above each other and 96mm to the right along the center line for the right hand side one. The other holes are for the regulator and fusebox. the 16x6mm washer is for creating some space between the battery frame and this base plate. Made this with Solid Edge 2021 and added a.STEP file so you can modify it to suit your needs. I printed this in ABS for a stronger and durable object.