citroen xsara picasso 2 button replacement remote key case - image

Files (2)

bigButton.stl

STL

17.4 KB

smallButton.stl

STL

23.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bigButton.stl	Accessory piece	17.4 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
smallButton.stl	Accessory piece	23.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

citroen xsara picasso 2 button replacement remote key case

0 downloads69 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The buttons of my car key were broken. I know other people with a Citroën and the buttons of the remote key case get usually broken, so I've make my own ones. The wide part goes inside and prevents the buttons from coming out.