Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| civic_bumper_fastener.stl | Primary model | 23.3 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Civic Bumper Fastener (2006-2011)
Shared by
3DPrintedCarPartDescription
2006-2011 Honda Civics have a black plastic "hanger" on the rear quarter panel, that the rear bumper cover snaps onto. A couple plastic fasteners on each side hold the hanger onto the quarter panel. This part is a modification of the factory fastener - this part requires a large flat-head screw to be driven into the fastener, to hold the hanger in place. You provide the screw. I can't provide the screw specifics, as I didn't end up needing this part after I printed it - my hanger replacement came with the fasteners needed. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0CyNYYXIAYU
Compatible Cars
Originally published on thingiverse.com by Glen Stewart (glenstewart) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
