Civic Type R License Plate Bracket Mount - image

Files (2)

CivicTypeR_Front_Plate_-_Front_bracket.stl

STL

3.4 MB

CivicTypeR_Front_Plate_-_Rear_bracket.stl

STL

1.1 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

83g

Based on 25% main infill across listed model files

Material cost

$2.00

Filament only at roughly $24/kg PETG / ASA

Print time

2.4h–4.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CivicTypeR_Front_Plate_-_Front_bracket.stl	Mount / bracket	3.4 MB STL	47g $1.14	52g $1.24	113g $2.71	Ensure proper orientation in slicer for optimal print quality
CivicTypeR_Front_Plate_-_Rear_bracket.stl	Mount / bracket	1.1 MB STL	29g $0.70	32g $0.76	70g $1.67	Ensure proper orientation in slicer for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

Civic Type R License Plate Bracket Mount

0 downloads63 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This bracket allows you to mount the front plates onto the car without having to drill the front bumper. Back piece slides though the front grill, and has holes for a zip tie so that can be used to prevent it from falling and become lost behind the grill. Back plate from amazon or Canadian tire 7$ CDN, spaced holes according to specs, but the plate I bought was off by about half a cm; nothing a drill and clippers couldn't fix. You will need to print the following (I didn't use supports): 2 Rear Brackets 1 Front Bracket Plate: http://canadiantire.ca/en/pdp/license-mounting-plate-black-0377420p.html. Screws / Bolt: 1/4-20.