Convertible Hardtop covers for BMW E46 - image

Files (2)

E46_combinded_body_Left.stl

STL

82.1 KB

E46_combinded_body_Right.stl

STL

90.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
E46_combinded_body_Left.stl	Choose left variant	82.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
E46_combinded_body_Right.stl	Choose right variant	90.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Convertible Hardtop covers for BMW E46

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My wifes car was equiped with a Hard top, but during summertime the hardtop is removed and there were these big gaping holes in the plastic trim. Apparantly there is a cover that fits there, but they cost aroun €60-80, each.. Can't have it that way and i wont pay that crazy amount for some plastic. Designed my own and sanded and plastidipped in black.. Looks good enough for me.. If you don't want to make one self, search for these part numbers on ebay or your local bmw dealer. 51717022385 51717022386 PS: The bunny ears will break, so just break them of before mounting.. They never aligned up but the part will not fall away.. it is snugg fittment.:).