Corsa D Cupholder hook for 28mm tube/Belkin phone holder - image

Files (1)

corsa_cupholder_hook.stl

STL

102.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
corsa_cupholder_hook.stl	Mount / bracket	102.9 KB STL	Slice file	Slice file	Slice file	Print with the flat side down as recommended by the designer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Corsa D Cupholder hook for 28mm tube/Belkin phone holder

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Print on its side, the flat side. Hook to attach my phone holder to the cupholder. This enables me to have it to hand whenever I need it, while still being able to use cupholders and keep it out of other storage areas. I have a Belkin "Car Universal Mount", a big suction cup mounted thing. The width of the tube at its widest is ~27mm, so I made the hook circle diameter 28mm in width, and the cutout is wide enough that it's easy to attach or remove it from the holder, though it's tight enough I don't bother to remove it during use. I measured the car's cup holder behind the gear stick, and it fits fine, though I didn't get the angle perfect. Printed in white PLA+ to hopefully be less likely to melt in a hot car.