Files (2)

C4_trunk_cover_lip_L.stl

STL

379.2 KB

C4_trunk_cover_lip_R.stl

STL

379.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
C4_trunk_cover_lip_L.stl	Cover / cap	379.2 KB STL	Slice file	Slice file	Slice file	Use PETG; check sealing faces and verify in slicer.
C4_trunk_cover_lip_R.stl	Cover / cap	379.2 KB STL	Slice file	Slice file	Slice file	Use PETG; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Corvette C4 trunk screen lip

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Replacement part for C4 Corvette trunk screen cover. made to prevent the screen from slipping underneath. This part was also built to match the contours of the original part so that it blends in well. Would recommend printing in PETG.