Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| tab.stl | Primary model | 351.4 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Print with a brim for stability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Cruze (and others) coil connector lock tab
Shared by
Michael ChenDescription
I don't expect this to be useful to a huge number of people, but if it is useful to even one person it is worthwhile sharing. As anyone who has a 1.4L Chevrolet Cruze (or similar) and who has tried to remove the ignition coil connector to do plug service knows, the orange lock tab will break if you even look at it the wrong way. I searched far and wide for a replacement part and could not find one. So I measured the original and duplicated it as best I could. Once printed in ABS and cleaned up a bit using an X-Acto knife and sandpaper I vapor polished it and it works like a charm.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
