Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Jeep_20oz_Rev_1.stl | Primary model | 26.4 KB STL | 9g $0.21 | 10g $0.23 | 21g $0.50 | Ensure the print bed is level and clean for a strong adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Cup Adapter 20oz Bottle - Jeep Grand Cherokee 2004
Shared by
3DPrintedCarPartDescription
The driver side cup holder was too big for smaller 20oz Soda Bottles in my Jeep Grand Cherokee 2004 and I had the bottle falling over while driving. I decided to make this adapter sleeve which fits in the drivers side cup holder. It was specifically sized to accommodate 20oz Soda Bottles. The fit is a little snug, which was intentional and did not seem to be harmful to the cars cup holder. The adapter I made using Tinkercad. I printed this in PETG due to the harsh temp environment of a car.
Compatible Cars
Originally published on thingiverse.com by Jeff B. (Nmr2d2156) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
